| Specifications for AR1903


 

Product Glance Value
Model ANTRACK
Version AR21
Capacity 4 units ANTMINER (Hydro) or
2 units ANTMINER (U2 Hydro) or
2 units ANTMINER (U3 Hydro) 
Maximum load,kW 24
Total load,kW 26

 

Detailed Characteristics Value
Part 1: Mining Cabinet  
Hardware Configuration  

Size (Length*Width*Height), mm (without package)

1260*600*1185

Size (Length*Width*Height), mm (with package)

1320*760*1320

Net weight, kg (without package)

138

Gross weight, kg (with package)

195

Network connection mode

RJ45 Ethernet 10/100M

Power Supply  
Power supply AC Input voltage, Volt(1-1) 380~415V AC
Power supply AC Input Frequency Range, Hz 50~60
Power supply AC Input current, Amp(1-2) 63
Water pump  

Rated power, W

450

Noise, dBA@1m

60
Lift, m 19
Size (Length*Width* Height), mm 360*210*268
Part 2: External Cooler(1-3)  
Hardware Configuration  
Size (Length*Width*Height), mm (without package)

1197*650*1177

Size (Length*Width*Height), mm (with package)

1320*760*1320

Net weight, kg (without package)

112

Gross weight, kg (with package)

165

Power supply  
Power supply AC input voltage, Volt(1-1) 380~415V AC
Power supply AC input frequency range, Hz 50~60
Maximum power supply AC input current, Amp(1-2) 63
Fan  
Rated power, W

750

Noise, dBA@1m

60

Size (Length*Height*Thickness), mm

850*850*305

Environment Requirements  
Ambient temperature, °C -20~45
Water flow, L/min 32.0~40.0 
Water pressure, bar ≤3.5
Working fluid(1-4) Organic Antifreeze (10%)
Installation distance, m(1-5) 5
Liquid PH 7.8~8.5
Storage temperature, °C -20~70
Operation humidity(non-condensing), RH 10~90%

Notes:

(1-1) Caution: Wrong input voltage may probably cause miner damaged.

(1-2) Three-phase AC input.

(1-3) The External cooler (heat pump) should be placed outdoors in a well-ventilated environment.

(1-4) If the water conductivity is ≥100 μs/cm, the fluid must be replaced. The water conductivity is less than 20 μs/cm when the system is running at the first time.

(1-5) The distance between mining cabinet and external cooler.

 

| Specification Details For S19 XP Hyd.


Product Glance  
Model S19 XP Hyd.
Version 10
Crypto algorithm/coins SHA256 | BTC/BCH/BSV
Typical hashrate, TH/s(1-1) 257
Power on wall @35°C(1-2), Watt(1-1) 5,346
Power efficiency on wall @35°C(1-2), J/TH(1-1) 20.8
Detailed Characteristics  
Power Supply  
Phase 3
Input voltage, Volt(2-1) 380~415
Input Frequency Range, Hz 50~60
Input max current, Amp 12
Hardware Configuration  
Networking connection mode RJ45 Ethernet 10/100M
Server Size (Length*Width*Height, w/o package), mm 410*170*209
Server Size (Length*Width*Height, with package), mm 570*316*430
Net weight, kg(2-2) 12.8
Gross weight, kg 14.1
Environment Requirements  

Inlet coolant temperature,°C

20~40

Coolant flow, L/min

8.0~10.0

Coolant pressure, bar

≤3.5

Working coolant(2-2)

Antifreeze/ Pure water/Deionized water

Coolant pH value

Antifreeze: 7.0~9.0

Prue water: 6.5~7.5

Deionized water:8.5~9.5

Diameter of coolant pipe connector, mm

OD10
Storage temperature,°C -20~70
Operation humidity(non-condensing) , RH 10~90%

NOTE:

(1-1) The hashrate value, power on wall, and power efficiency on wall are all typical values.The actual hashrate value fluctuates by ± 3%, and the actual power on wall and powerefficiency on wall fluctuate by ±5%.
(1-2) Inlet coolant temperature.
(2-1) Caution: Wrong input voltage may cause server damaged.
(2-2) For detailed working coolant use and maintenance instructions, please refer to “ANTSPACE HW7 Liquid cooling container & Dry-cooling Tower product manual”, Chapter 9, Article 3, Point 6, “Coolant Maintenance”!

PS: Please note that the Hydro-cooling miners are shipped without power cables. There are power cables inside the ANTRACK.

Reviews

There are no reviews yet.

Be the first to review “SPOT AR1903”

Your email address will not be published. Required fields are marked *